Difference between revisions of "Installing CentOS/RedHat on disks larger than 2Tb"

From Peter Pap's Technowiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
So you have a new server that has a lot of disk!  The classic example is you have a server with 8 x 1Tb drives or something similar and you do not want to be restricted to using only 2Tb of disk, as dictated by the default MSDOS disk label.  You've set up a RAID-5 or 6 array using these drives and want to use all the available space.  You may read things about using EFI instead of BIOS, but that can be a massive hassle.  The easier way to get this happening is to use a Guid Partition Table (GPT) disk label.  This will allow you to have partitions greater than 2Tb without having to change from using BIOS to EFI.  This is CentOS 6 specific!  The method I describe here is a little fiddly, but it works.  You will need a [http://gparted.sourceforge.net/ GParted Live CD] and a Kickstart server.   
+
So you have a new server that has a lot of disk!  The classic example is you have a server with 8 x 1Tb drives or something similar and you do not want to be restricted to using only 2Tb of disk, as dictated by the default MSDOS disk label.  You've set up a RAID-5 or 6 array using these drives and want to use all the available space.  You may read things about using EFI instead of BIOS, but that can be a massive hassle.  The easier way to get this happening is to use a Guid Partition Table (GPT) disk label.  This will allow you to have partitions greater than 2Tb without having to change from using BIOS to EFI.  This is CentOS 6 specific as the version of GRUB that comes with CentOS 5 does not support booting off GPT partitions!  The method I describe here is a little fiddly, but it works.  You will need a [http://gparted.sourceforge.net/ GParted Live CD] and a Kickstart server.   
  
 
1. Download the GParted ISO image and boot off it.   
 
1. Download the GParted ISO image and boot off it.   

Latest revision as of 02:45, 5 March 2012

So you have a new server that has a lot of disk! The classic example is you have a server with 8 x 1Tb drives or something similar and you do not want to be restricted to using only 2Tb of disk, as dictated by the default MSDOS disk label. You've set up a RAID-5 or 6 array using these drives and want to use all the available space. You may read things about using EFI instead of BIOS, but that can be a massive hassle. The easier way to get this happening is to use a Guid Partition Table (GPT) disk label. This will allow you to have partitions greater than 2Tb without having to change from using BIOS to EFI. This is CentOS 6 specific as the version of GRUB that comes with CentOS 5 does not support booting off GPT partitions! The method I describe here is a little fiddly, but it works. You will need a GParted Live CD and a Kickstart server.

1. Download the GParted ISO image and boot off it.

NOTE: If you don't want to use the GParted ISO, then use any Live CD that has parted on it.

2. If there are no existing partitions go to step 3. If there are any partitions, delete them using either the GUI or the following commands:

a. List the current partitions:

 sudo bash
 parted /dev/sda print

Output will look something like:

 Disk /dev/sda: 6998GB
 Sector size (logocal/physical): 512B/512B
 Partition Table: gpt
 
 Number  Start   End     Size    File system  Name  Flags
  1      1049kB  525MB   524MB   ext4               boot
  2      525MB   6998GB  6997GB                     lvm

b. Delete the partitions you saw in the output of the previous command

 parted /dev/sda rm 1
 parted /dev/sda rm 2

You may get the following error:

 Error: Partitions(s) 1 on /dev/sda have been written, but we have been unable to
 inform the kernel of the change, probably because it/they are in use.  As a
 result, the old partition(s) will remain in use.  You should reboot now before
 making further changes.
 Ignore/Cancel?

It is safe to ignore this error and keep going!

3. Now use parted to change the disk label to GPT

 sudo parted -s /dev/sda mklabel gpt

You may get the same error as in step 2b, but again, keep going!

4. Reboot the machine and begin the Kickstart install. Your Kickstart file should have something like this for the disk layout:

 ignoredisk --only-use=sda
 
 clearpart --linux --drives=sda
 
 part /boot --fstype=ext4 --size=500
 part pv.pv1 --grow --size=1
 
 volgroup vg1 --pesize=4096 pv.pv1
 logvol /data --fstype=ext4 --name=data --vgname=vg1 --size=6498824
 logvol /home --fstype=ext4 --name=home --vgname=vg1 --size=40960
 logvol / --fstype=ext4 --name=root --vgname=vg1 --size=51200
 logvol swap --name=swap --vgname=vg1 --size=20480
 logvol /usr --fstype=ext4 --name=usr --vgname=vg1 --size=20480
 logvol /var --fstype=ext4 --name=var --vgname=vg1 --size=40960
 
 bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet"

NOTE: The following lines should NOT be in your Kickstart file:

 zerombr
 clearpart --all --initlabel

This will destroy the disk label and put an msdos label back in place!

That's basically it. Kickstart should now work and will use all the available space.