Difference between revisions of "Adding a Disk and Extending a Logical Volume"

From Peter Pap's Technowiki
Jump to: navigation, search
Line 32: Line 32:
 
3. Check to see if the new device is there
 
3. Check to see if the new device is there
  
   # pvscan
+
   # ls -al /dev/sd*
    PV /dev/sdb1   VG data   lvm2 [100.00 GiB / 0    free]
+
  brw-rw---- 1 root disk 8,  0 Jan 22 01:14 /dev/sda
    PV /dev/sdc1   VG data   lvm2 [100.00 GiB / 0    free]
+
   brw-rw---- 1 root disk 8,  1 Jan 22 01:14 /dev/sda1
    PV /dev/sdd1   VG data   lvm2 [100.00 GiB / 100.00 GiB free]
+
   brw-rw---- 1 root disk 8,  2 Jan 22 01:14 /dev/sda2
    PV /dev/sda3   VG vg1    lvm2 [47.84 GiB / 17.59 GiB free]
+
  brw-rw---- 1 root disk 8,  3 Jan 22 01:14 /dev/sda3
    Total: 4 [347.83 GiB] / in use: 4 [347.83 GiB] / in no VG: 0 [0  ]
+
   brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb
 +
   brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1
 +
  brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc
 +
   brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1
 +
   '''brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd'''
 +
 
 +
4. Add the disk to your machine as a primary partition
 +
 
 +
  # fdisk /dev/sdd
 +
  Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
 +
  Building a new DOS disklabel with disk identifier 0x663d32f6.
 +
   Changes will remain in memory only, until you decide to write them.
 +
  After that, of course, the previous content won't be recoverable.
 +
 
 +
  Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
 +
 
 +
  WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
 +
          switch off the mode (command 'c') and change display units to
 +
          sectors (command 'u').
 +
 
 +
  Command (m for help): '''m'''
 +
  Command action
 +
    a  toggle a bootable flag
 +
    b  edit bsd disklabel
 +
    c  toggle the dos compatibility flag
 +
    d  delete a partition
 +
    l  list known partition types
 +
    m  print this menu
 +
    n  add a new partition
 +
    o  create a new empty DOS partition table
 +
    p  print the partition table
 +
    q  quit without saving changes
 +
    s  create a new empty Sun disklabel
 +
    t  change a partition's system id
 +
    u  change display/entry units
 +
    v  verify the partition table
 +
    w  write table to disk and exit
 +
    x  extra functionality (experts only)
 +
 
 +
  Command (m for help): '''n'''
 +
  Command action
 +
    e  extended
 +
    p  primary partition (1-4)
 +
  '''p'''
 +
  Partition number (1-4): '''1'''
 +
  First cylinder (1-13054, default 1):
 +
  Using default value 1
 +
  Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054):
 +
  Using default value 13054
 +
 
 +
  Command (m for help): '''w'''
 +
  The partition table has been altered!
 +
 
 +
  Calling ioctl() to re-read partition table.
 +
  Syncing disks.
 +
 
 +
You sould now have an additional device:
  
 
   # ls -al /dev/sd*
 
   # ls -al /dev/sd*
Line 48: Line 104:
 
   brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc
 
   brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc
 
   brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1
 
   brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1
   '''brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd'''
+
  brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd
 +
   '''brw-rw---- 1 root disk 8, 49 Jan 22 01:14 /dev/sdd1'''

Revision as of 03:31, 22 January 2015

So you have a logical volume that has run out of space and you need to add more. Either it's a VM and you've added another disk file or it's a physical server and you've added another disk.

1. Check the current disk devices with the following commands:

 # pvscan
   PV /dev/sdb1   VG data   lvm2 [100.00 GiB / 0    free]
   PV /dev/sdc1    VG data  lvm2 [100.00 GiB / 0    free]
   PV /dev/sda3   VG vg1    lvm2 [47.84 GiB / 17.59 GiB free]
   Total: 4 [247.83 GiB] / in use: 3 [247.83 GiB] / in no VG: 0 [0   ]
 
 # ls -al /dev/sd*
 brw-rw---- 1 root disk 8,  0 Jan 22 01:14 /dev/sda
 brw-rw---- 1 root disk 8,  1 Jan 22 01:14 /dev/sda1
 brw-rw---- 1 root disk 8,  2 Jan 22 01:14 /dev/sda2
 brw-rw---- 1 root disk 8,  3 Jan 22 01:14 /dev/sda3
 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb
 brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1
 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc
 brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1

2. Scan the scsi bus to find the new disk

List the host SCSI adapters

 # ls /sys/class/scsi_host/
 host0  host1  host2

Probe each host adapter

 # echo "- - -" > /sys/class/scsi_host/host0/scan
 # echo "- - -" > /sys/class/scsi_host/host1/scan
 # echo "- - -" > /sys/class/scsi_host/host2/scan

3. Check to see if the new device is there

 # ls -al /dev/sd*
 brw-rw---- 1 root disk 8,  0 Jan 22 01:14 /dev/sda
 brw-rw---- 1 root disk 8,  1 Jan 22 01:14 /dev/sda1
 brw-rw---- 1 root disk 8,  2 Jan 22 01:14 /dev/sda2
 brw-rw---- 1 root disk 8,  3 Jan 22 01:14 /dev/sda3
 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb
 brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1
 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc
 brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1
 brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd

4. Add the disk to your machine as a primary partition

 # fdisk /dev/sdd
 Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
 Building a new DOS disklabel with disk identifier 0x663d32f6.
 Changes will remain in memory only, until you decide to write them.
 After that, of course, the previous content won't be recoverable.
 
 Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
 
 WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
          switch off the mode (command 'c') and change display units to
          sectors (command 'u').
 
 Command (m for help): m
 Command action
    a   toggle a bootable flag
    b   edit bsd disklabel
    c   toggle the dos compatibility flag
    d   delete a partition
    l   list known partition types
    m   print this menu
    n   add a new partition
    o   create a new empty DOS partition table
    p   print the partition table
    q   quit without saving changes
    s   create a new empty Sun disklabel
    t   change a partition's system id
    u   change display/entry units
    v   verify the partition table
    w   write table to disk and exit
    x   extra functionality (experts only)
 
 Command (m for help): n
 Command action
    e   extended
    p   primary partition (1-4)
 p
 Partition number (1-4): 1
 First cylinder (1-13054, default 1):
 Using default value 1
 Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054):
 Using default value 13054
 
 Command (m for help): w
 The partition table has been altered!
 
 Calling ioctl() to re-read partition table.
 Syncing disks.

You sould now have an additional device:

 # ls -al /dev/sd*
 brw-rw---- 1 root disk 8,  0 Jan 22 01:14 /dev/sda
 brw-rw---- 1 root disk 8,  1 Jan 22 01:14 /dev/sda1
 brw-rw---- 1 root disk 8,  2 Jan 22 01:14 /dev/sda2
 brw-rw---- 1 root disk 8,  3 Jan 22 01:14 /dev/sda3
 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb
 brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1
 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc
 brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1
 brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd
 brw-rw---- 1 root disk 8, 49 Jan 22 01:14 /dev/sdd1