Adding a Disk and Extending a Logical Volume
From Peter Pap's Technowiki
So you have a logical volume that has run out of space and you need to add more. Either it's a VM and you've added another disk file or it's a physical server and you've added another disk.
1. Check the current disk devices with the following commands:
# pvscan PV /dev/sdb1 VG data lvm2 [100.00 GiB / 0 free] PV /dev/sdc1 VG data lvm2 [100.00 GiB / 0 free] PV /dev/sda3 VG vg1 lvm2 [47.84 GiB / 17.59 GiB free] Total: 4 [247.83 GiB] / in use: 3 [247.83 GiB] / in no VG: 0 [0 ] # ls -al /dev/sd* brw-rw---- 1 root disk 8, 0 Jan 22 01:14 /dev/sda brw-rw---- 1 root disk 8, 1 Jan 22 01:14 /dev/sda1 brw-rw---- 1 root disk 8, 2 Jan 22 01:14 /dev/sda2 brw-rw---- 1 root disk 8, 3 Jan 22 01:14 /dev/sda3 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1
2. Scan the scsi bus to find the new disk
List the host SCSI adapters
# ls /sys/class/scsi_host/ host0 host1 host2
Probe each host adapter
# echo "- - -" > /sys/class/scsi_host/host0/scan # echo "- - -" > /sys/class/scsi_host/host1/scan # echo "- - -" > /sys/class/scsi_host/host2/scan
3. Check to see if the new device is there
# ls -al /dev/sd* brw-rw---- 1 root disk 8, 0 Jan 22 01:14 /dev/sda brw-rw---- 1 root disk 8, 1 Jan 22 01:14 /dev/sda1 brw-rw---- 1 root disk 8, 2 Jan 22 01:14 /dev/sda2 brw-rw---- 1 root disk 8, 3 Jan 22 01:14 /dev/sda3 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1 brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd
4. Add the disk to your machine as a primary partition
# fdisk /dev/sdd Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel with disk identifier 0x663d32f6. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): m Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-13054, default 1): Using default value 1 Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054): Using default value 13054 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks.
5. Create a new physical LVM volume on our new disk.
# pvcreate /dev/sdd1 Physical volume "/dev/sdd1" successfully created You sould now have an additional device:
# ls -al /dev/sd* brw-rw---- 1 root disk 8, 0 Jan 22 01:14 /dev/sda brw-rw---- 1 root disk 8, 1 Jan 22 01:14 /dev/sda1 brw-rw---- 1 root disk 8, 2 Jan 22 01:14 /dev/sda2 brw-rw---- 1 root disk 8, 3 Jan 22 01:14 /dev/sda3 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1 brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd brw-rw---- 1 root disk 8, 49 Jan 22 01:14 /dev/sdd1
6. Extend the Volume Group, in this case called data
# vgextend data /dev/sdd1 Volume group "data" successfully extended
The new disk should now be added to the Volume Group:
# vgdisplay -v data Using volume group(s) on command line Finding volume group "data" --- Volume group --- VG Name data System ID Format lvm2 Metadata Areas 3 Metadata Sequence No 11 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 3 Act PV 3 VG Size 299.99 GiB PE Size 4.00 MiB Total PE 76797 Alloc PE / Size 51193 / 199.97 GiB Free PE / Size 25604 / 100.02 GiB VG UUID lEHcjJ-OEEf-pEbi-J00j-5de9-T3ZE-4QPv4H --- Logical volume --- LV Name /dev/data/blah VG Name data LV UUID aiOIEx-2kK5-RVGr-SHWv-InhH-B69p-j65ziL LV Write Access read/write LV Status available # open 1 LV Size 199.97 GiB Current LE 51193 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Physical volumes --- PV Name /dev/sdb1 PV UUID C0KYU9-krfx-c7pw-pLWo-wf3l-EqiO-qBx3wi PV Status allocatable Total PE / Free PE 25599 / 0 PV Name /dev/sdc1 PV UUID qIo3zt-TwBx-Ze6x-BZvy-aY7x-n1NP-IgimVk PV Status allocatable Total PE / Free PE 25599 / 5 PV Name /dev/sdd1 PV UUID bbUskE-8rDY-CdgP-0tQy-CVrJ-SBZI-kaQmUj PV Status allocatable Total PE / Free PE 25599 / 25599
7.