Adding a Disk and Extending a Logical Volume: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 93: | Line 93: | ||
Syncing disks. | Syncing disks. | ||
You sould now have an additional device: | |||
5. Create a new physical LVM volume on our new disk. | |||
# pvcreate /dev/sdd1 | |||
Physical volume "/dev/sdd1" successfully created | |||
You sould now have an additional device: | |||
# ls -al /dev/sd* | # ls -al /dev/sd* | ||
| Line 106: | Line 112: | ||
brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd | brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd | ||
'''brw-rw---- 1 root disk 8, 49 Jan 22 01:14 /dev/sdd1''' | '''brw-rw---- 1 root disk 8, 49 Jan 22 01:14 /dev/sdd1''' | ||
6. Extend the Volume Group, in this case called '''data''' | |||
# vgextend data /dev/sdd1 | |||
Volume group "data" successfully extended | |||
The new disk should now be added to the Volume Group: | |||
# vgdisplay -v data | |||
Using volume group(s) on command line | |||
Finding volume group "data" | |||
--- Volume group --- | |||
VG Name data | |||
System ID | |||
Format lvm2 | |||
Metadata Areas 3 | |||
Metadata Sequence No 11 | |||
VG Access read/write | |||
VG Status resizable | |||
MAX LV 0 | |||
Cur LV 1 | |||
Open LV 1 | |||
Max PV 0 | |||
Cur PV 3 | |||
Act PV 3 | |||
VG Size 299.99 GiB | |||
PE Size 4.00 MiB | |||
Total PE 76797 | |||
Alloc PE / Size 51193 / 199.97 GiB | |||
Free PE / Size 25604 / 100.02 GiB | |||
VG UUID lEHcjJ-OEEf-pEbi-J00j-5de9-T3ZE-4QPv4H | |||
--- Logical volume --- | |||
LV Name /dev/data/blah | |||
VG Name data | |||
LV UUID aiOIEx-2kK5-RVGr-SHWv-InhH-B69p-j65ziL | |||
LV Write Access read/write | |||
LV Status available | |||
# open 1 | |||
LV Size 199.97 GiB | |||
Current LE 51193 | |||
Segments 2 | |||
Allocation inherit | |||
Read ahead sectors auto | |||
- currently set to 256 | |||
Block device 253:1 | |||
--- Physical volumes --- | |||
PV Name /dev/sdb1 | |||
PV UUID C0KYU9-krfx-c7pw-pLWo-wf3l-EqiO-qBx3wi | |||
PV Status allocatable | |||
Total PE / Free PE 25599 / 0 | |||
PV Name /dev/sdc1 | |||
PV UUID qIo3zt-TwBx-Ze6x-BZvy-aY7x-n1NP-IgimVk | |||
PV Status allocatable | |||
Total PE / Free PE 25599 / 5 | |||
'''PV Name /dev/sdd1 | |||
PV UUID bbUskE-8rDY-CdgP-0tQy-CVrJ-SBZI-kaQmUj | |||
PV Status allocatable | |||
Total PE / Free PE 25599 / 25599''' | |||
7. | |||
Revision as of 03:42, 22 January 2015
So you have a logical volume that has run out of space and you need to add more. Either it's a VM and you've added another disk file or it's a physical server and you've added another disk.
1. Check the current disk devices with the following commands:
# pvscan PV /dev/sdb1 VG data lvm2 [100.00 GiB / 0 free] PV /dev/sdc1 VG data lvm2 [100.00 GiB / 0 free] PV /dev/sda3 VG vg1 lvm2 [47.84 GiB / 17.59 GiB free] Total: 4 [247.83 GiB] / in use: 3 [247.83 GiB] / in no VG: 0 [0 ] # ls -al /dev/sd* brw-rw---- 1 root disk 8, 0 Jan 22 01:14 /dev/sda brw-rw---- 1 root disk 8, 1 Jan 22 01:14 /dev/sda1 brw-rw---- 1 root disk 8, 2 Jan 22 01:14 /dev/sda2 brw-rw---- 1 root disk 8, 3 Jan 22 01:14 /dev/sda3 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1
2. Scan the scsi bus to find the new disk
List the host SCSI adapters
# ls /sys/class/scsi_host/ host0 host1 host2
Probe each host adapter
# echo "- - -" > /sys/class/scsi_host/host0/scan # echo "- - -" > /sys/class/scsi_host/host1/scan # echo "- - -" > /sys/class/scsi_host/host2/scan
3. Check to see if the new device is there
# ls -al /dev/sd* brw-rw---- 1 root disk 8, 0 Jan 22 01:14 /dev/sda brw-rw---- 1 root disk 8, 1 Jan 22 01:14 /dev/sda1 brw-rw---- 1 root disk 8, 2 Jan 22 01:14 /dev/sda2 brw-rw---- 1 root disk 8, 3 Jan 22 01:14 /dev/sda3 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1 brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd
4. Add the disk to your machine as a primary partition
# fdisk /dev/sdd
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x663d32f6.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-13054, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054):
Using default value 13054
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
5. Create a new physical LVM volume on our new disk.
# pvcreate /dev/sdd1 Physical volume "/dev/sdd1" successfully created You sould now have an additional device:
# ls -al /dev/sd* brw-rw---- 1 root disk 8, 0 Jan 22 01:14 /dev/sda brw-rw---- 1 root disk 8, 1 Jan 22 01:14 /dev/sda1 brw-rw---- 1 root disk 8, 2 Jan 22 01:14 /dev/sda2 brw-rw---- 1 root disk 8, 3 Jan 22 01:14 /dev/sda3 brw-rw---- 1 root disk 8, 16 Jan 22 01:14 /dev/sdb brw-rw---- 1 root disk 8, 17 Jan 22 01:14 /dev/sdb1 brw-rw---- 1 root disk 8, 32 Jan 22 01:14 /dev/sdc brw-rw---- 1 root disk 8, 33 Jan 22 01:14 /dev/sdc1 brw-rw---- 1 root disk 8, 48 Jan 22 01:14 /dev/sdd brw-rw---- 1 root disk 8, 49 Jan 22 01:14 /dev/sdd1
6. Extend the Volume Group, in this case called data
# vgextend data /dev/sdd1 Volume group "data" successfully extended
The new disk should now be added to the Volume Group:
# vgdisplay -v data
Using volume group(s) on command line
Finding volume group "data"
--- Volume group ---
VG Name data
System ID
Format lvm2
Metadata Areas 3
Metadata Sequence No 11
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 1
Open LV 1
Max PV 0
Cur PV 3
Act PV 3
VG Size 299.99 GiB
PE Size 4.00 MiB
Total PE 76797
Alloc PE / Size 51193 / 199.97 GiB
Free PE / Size 25604 / 100.02 GiB
VG UUID lEHcjJ-OEEf-pEbi-J00j-5de9-T3ZE-4QPv4H
--- Logical volume ---
LV Name /dev/data/blah
VG Name data
LV UUID aiOIEx-2kK5-RVGr-SHWv-InhH-B69p-j65ziL
LV Write Access read/write
LV Status available
# open 1
LV Size 199.97 GiB
Current LE 51193
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1
--- Physical volumes ---
PV Name /dev/sdb1
PV UUID C0KYU9-krfx-c7pw-pLWo-wf3l-EqiO-qBx3wi
PV Status allocatable
Total PE / Free PE 25599 / 0
PV Name /dev/sdc1
PV UUID qIo3zt-TwBx-Ze6x-BZvy-aY7x-n1NP-IgimVk
PV Status allocatable
Total PE / Free PE 25599 / 5
PV Name /dev/sdd1
PV UUID bbUskE-8rDY-CdgP-0tQy-CVrJ-SBZI-kaQmUj
PV Status allocatable
Total PE / Free PE 25599 / 25599
7.