View source for Cloning the base LDOM image to create new LDOMs

So You should by now have create a base LDOM image and be ready to clone it into lots of different LDOMs.

1. Create a snapshot of the base LDOMs ZFS disk image

  zfs snapshot storage/base/disk0@unconfigured_base

ZFS table should look something like this:

  # zfs list
  NAME                                   USED  AVAIL  REFER  MOUNTPOINT
  rpool                                 25.4G   109G    93K  /rpool
  rpool/ROOT                            5.36G   109G    18K  legacy
  rpool/ROOT/s10s_u7wos_08              5.36G   109G  5.36G  /
  rpool/dump                            10.0G   109G  10.0G  -
  rpool/swap                              10G   118G  16.4M  -
  storage                               46.4G   620G  36.5K  /storage
  storage/base                          46.4G   620G  34.9K  /storage/base
  storage/base/disk0                    46.4G   658G  9.24G  -
  storage/base/disk0@unconfigured_base      0      -  9.24G  -

Note that the snapshot has a size of 0!

2. Create a new ZFS filesystem to hold the disk image of the new LDOM you want to create

  zfs create storage/ldomclone

3. Clone the base LDOM disk image from it's snapshot

  zfs clone storage/base/disk0@unconfigured_base storage/ldomclone/disk0

This create a disk image called storage/ldomclone/disk0 which is an exact copy of the base image.  Again, notice that the clone has a size of 0:

  # zfs list
  NAME                                   USED  AVAIL  REFER  MOUNTPOINT
  rpool                                 25.4G   109G    93K  /rpool
  rpool/ROOT                            5.36G   109G    18K  legacy
  rpool/ROOT/s10s_u7wos_08              5.36G   109G  5.36G  /
  rpool/dump                            10.0G   109G  10.0G  -
  rpool/swap                              10G   118G  16.4M  -
  storage                               46.4G   620G  38.2K  /storage
  storage/base                          46.4G   620G  34.9K  /storage/base
  storage/base/disk0                    46.4G   658G  9.24G  -
  storage/base/disk0@unconfigured_base      0      -  9.24G  -
  storage/ldomclone                     34.9K   620G  34.9K  /storage/ldomclone
  storage/ldomclone/disk0                   0   620G  9.24G  -

4. Now follow steps '''3-12''' of [[Creating a base LDOM image]], except you do not need to perform a Jumpstart as the OS is already built!  In '''Step 6''', you should substitute the values for the new cloned disk image!

5. Once you telnet to the console of the new LDOM, it should prompt you with few questions about the hostname, IP and DNS settings.  Once done, the LDOM will reboot and be ready to use!