Reseting a Switch Config to Factory Defaults

From Peter Pap's Technowiki
Revision as of 03:36, 21 September 2010 by Ppapa (talk | contribs) (Created page with "1. Disconnect the switch from it's power source. 2. Hold down the mode button on the front and connect the power cable. 3. When you see the 'switch:' prompt, do the following: ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

1. Disconnect the switch from it's power source.

2. Hold down the mode button on the front and connect the power cable.

3. When you see the 'switch:' prompt, do the following:

  switch: flash_init
  switch: load_helper
  switch: rename flash:config.text flash:config.backup
  switch: boot
  Would you like to enter the initial configuration dialog? [yes/no]: yes

Then answer appropriately.