Difference between revisions of "Replacing a failed disk in a software mirror"

From Peter Pap's Technowiki
Jump to: navigation, search
(CentOS/RedHat)
(Solaris)
Line 65: Line 65:
 
   usb0/1                        unknown      empty        unconfigured ok
 
   usb0/1                        unknown      empty        unconfigured ok
 
   usb0/2                        unknown      empty        unconfigured ok
 
   usb0/2                        unknown      empty        unconfigured ok
 +
 +
'''NOTE:''' You may get this error:
 +
 +
  # cfgadm -c unconfigure c0::dsk/c0t0d0
 +
  cfgadm: Component system is busy, try again: failed to offline:
 +
      Resource            Information
 +
  ------------------  -----------------------
 +
  /dev/dsk/c0t1d0s1  dump device (dedicated)
 +
 +
This means that the slice in question has been set as the dump device, instead of the mirror slice.  You can confirm it with:
 +
 +
  # dumpadm
 +
        Dump content: kernel pages
 +
        Dump device: /dev/dsk/c0t1d0s1 (dedicated)
 +
  Savecore directory: /var/crash/hostname
 +
    Savecore enabled: yes
 +
    Save compressed: on
 +
 +
You fix it with:
 +
 +
  # dumpadm -d  /dev/md/dsk/d10
 +
        Dump content: kernel pages
 +
        Dump device: /dev/md/dsk/d10 (swap)
 +
  Savecore directory: /var/crash/hostname
 +
    Savecore enabled: yes
 +
    Save compressed: on
 +
 +
Now you should be able to unconfigure the drive.
  
 
7. Physically replace the failed drive
 
7. Physically replace the failed drive
Line 129: Line 157:
  
 
then it is using the wrong version of 'dd'.  Change  your PATH to put /usr/bin/dd first in your PATH.
 
then it is using the wrong version of 'dd'.  Change  your PATH to put /usr/bin/dd first in your PATH.
 
  
 
== CentOS/RedHat ==
 
== CentOS/RedHat ==

Revision as of 04:23, 19 September 2018

Solaris

So here's the scenario, you have a server with disk mirrored with Solaris Disksuite, c0t0d0 and c0t1d0. The disk c0t1d0 has failed and you want to replace it without shutting down the box. We have the following metadevices and sub-mirrors:

  • d0: d1 and d2
  • d10: d11 and d12
  • d20: d21 and d22
  • d30: d31 and d32
  • d40: d41 and d42
  • d50: d51 and d52

This procedure had been tested and works on a SunFire V125 running Solaris 10. You may have to alter this slightly depending on the hardware you are running. Consult the User Guide for you server on how best to replace a drive on a running system.

1. Delete the meta databases stored on the failed disk, stored in this case on slice 7 of the disk

 metadb -d c0t1d0s7

2. Detach the sub-mirrors, from the failed disk, from the meta devices

 metadetach -f d0 d2
 metadetach -f d10 d12
 metadetach -f d20 d22
 metadetach -f d30 d32
 metadetach -f d40 d42
 metadetach -f d50 d52

The -f option is necessary as you will need to force this to happen as the disk has failed.

3. Clear the meta-devices that we associated with the failed disk

 metaclear d2
 metaclear d12
 metaclear d22
 metaclear d32
 metaclear d42
 metaclear d52

4. Find the correct Ap_Id for the failed disk, with the cfgadm command

 cfgadm -al
 Ap_Id                          Type         Receptacle   Occupant     Condition
 c0                             scsi-bus     connected    configured   unknown
 c0::dsk/c0t0d0                 disk         connected    configured   unknown
 c0::dsk/c0t1d0                 disk         connected    configured   unknown
 c1                             scsi-bus     connected    unconfigured unknown
 usb0/1                         unknown      empty        unconfigured ok
 usb0/2                         unknown      empty        unconfigured ok

5. Unconfigure the device so that you can remove it

 cfgadm -c unconfigure c0::dsk/c0t1d0

6. Check that the device is now unconfigured

 cfgadm -al
 Ap_Id                          Type         Receptacle   Occupant     Condition
 c0                             scsi-bus     connected    configured   unknown
 c0::dsk/c0t0d0                 disk         connected    configured   unknown
 c0::dsk/c0t1d0                 disk         connected    unconfigured unknown
 c1                             scsi-bus     connected    unconfigured unknown
 usb0/1                         unknown      empty        unconfigured ok
 usb0/2                         unknown      empty        unconfigured ok

NOTE: You may get this error:

 # cfgadm -c unconfigure c0::dsk/c0t0d0
 cfgadm: Component system is busy, try again: failed to offline:
      Resource             Information
 ------------------  -----------------------
 /dev/dsk/c0t1d0s1   dump device (dedicated)

This means that the slice in question has been set as the dump device, instead of the mirror slice. You can confirm it with:

 # dumpadm
       Dump content: kernel pages
        Dump device: /dev/dsk/c0t1d0s1 (dedicated)
 Savecore directory: /var/crash/hostname
   Savecore enabled: yes
    Save compressed: on

You fix it with:

 # dumpadm -d  /dev/md/dsk/d10
       Dump content: kernel pages
        Dump device: /dev/md/dsk/d10 (swap)
 Savecore directory: /var/crash/hostname
   Savecore enabled: yes
    Save compressed: on

Now you should be able to unconfigure the drive.

7. Physically replace the failed drive

8. Use cfgadm to see if the OS has automatically configured the drive

 cfgadm -al

If the status of the drive hasn't changed to 'configured', change it manually

 cfgadm -c configure c0::dsk/c0t1d0

9. Use the format command to check that the OS can see the drive.

 format
 Searching for disks...done
 
 
 AVAILABLE DISK SELECTIONS:
        0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
           /pci@1c,600000/scsi@2/sd@0,0
        1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
           /pci@1c,600000/scsi@2/sd@1,0
 Specify disk (enter its number):

10. Copy the primary disks VTOC to the secondary disk:

 prtvtoc /dev/rdsk/c0t0d0s2 | fmthard -s - /dev/rdsk/c0t1d0s2

11. Re-create the meta databases on the new disk

 metadb -f -a -c3 /dev/dsk/c0t1d0s7

12. Re-create the meta devices on the new disk

 metainit d2 1 1 c0t1d0s0
 metainit d12 1 1 c0t1d0s1
 metainit d22 1 1 c0t1d0s3
 metainit d32 1 1 c0t1d0s4
 metainit d42 1 1 c0t1d0s5
 metainit d52 1 1 c0t1d0s6

13. Attach the meta devices from the new disk to the primary meta devices

 metattach d0 d2
 metattach d10 d12
 metattach d20 d22
 metattach d30 d32
 metattach d40 d42
 metattach d50 d52

You can monitor the progress of mirroring with this command:

 metastat | grep -i progress

14. Install the boot block on the new hard disk so that you can boot off it

 installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c0t1d0s0

NOTE: If you get this error with the installboot command

 dd: unrecognized operand `oseek'=`1' Try `dd --help' for more information.

then it is using the wrong version of 'dd'. Change your PATH to put /usr/bin/dd first in your PATH.

CentOS/RedHat

So you have a failed disk in your software raid. When you look at /proc/mdstat it looks something like:

 # cat /proc/mdstat
 Personalities : [raid1]
 md1 : active raid1 sdb1[1] sda1[2](F)
       104320 blocks [2/1] [_U]
 
 md4 : active raid1 sdb2[1] sda2[2](F)
       6289344 blocks [2/1] [_U]
 
 md5 : active raid1 sdb5[1] sda5[2](F)
       4192832 blocks [2/1] [_U]
 
 md2 : active raid1 sdb6[1] sda6[0]
       2096384 blocks [2/2] [UU]
 
 md3 : active raid1 sdb7[1] sda7[2](F)
       16570944 blocks [2/1] [_U]
 
 md0 : active raid1 sdb3[1] sda3[2](F)
       6289344 blocks [2/1] [_U]
 
 unused devices: <none>

This indicates that /dev/sda has failed.

To replace it, do the following:

1. Use mdstat to fail and remove each of the slices associated with the failed disk

  mdadm --manage /dev/md1 --fail /dev/sda1
  mdadm --manage /dev/md1 --remove /dev/sda1
  

/proc/mdstat should look something like this:

 # cat /proc/mdstat
 Personalities : [raid1]
 md1 : active raid1 sdb1[1]
       104320 blocks [2/1] [_U]
 
 md4 : active raid1 sdb2[1] sda2[2](F)
       6289344 blocks [2/1] [_U]
 
 md5 : active raid1 sdb5[1] sda5[2](F)
       4192832 blocks [2/1] [_U]
 
 md2 : active raid1 sdb6[1] sda6[0]
       2096384 blocks [2/2] [UU]
 
 md3 : active raid1 sdb7[1] sda7[2](F)
       16570944 blocks [2/1] [_U]
 
 md0 : active raid1 sdb3[1] sda3[2](F)
       6289344 blocks [2/1] [_U]
 
 unused devices: <none>

Repeat for each slice of the failed disk.

/proc/mdstat should now look like this:

 # cat /proc/mdstat
 Personalities : [raid1]
 md1 : active raid1 sdb1[1]
       104320 blocks [2/1] [_U]
 
 md4 : active raid1 sdb2[1]
       6289344 blocks [2/1] [_U]
 
 md5 : active raid1 sdb5[1]
       4192832 blocks [2/1] [_U]
 
 md2 : active raid1 sdb6[1]
       2096384 blocks [2/1] [_U]
 
 md3 : active raid1 sdb7[1]
       16570944 blocks [2/1] [_U]
 
 md0 : active raid1 sdb3[1]
       6289344 blocks [2/1] [_U]
 
 unused devices: <none>

2. Shutdown the server and replace the failed disk

 shutdown -h now

3. Startup the server and boot off the good disk.

4. Copy the partition table from the good disk to the replacement disk

 sfdisk -d /dev/sdb | sfdisk /dev/sda

5. To make sure that there are no remains from previous RAID installations on /dev/sda, we run the following commands:

 mdadm --zero-superblock /dev/sda1
 mdadm --zero-superblock /dev/sda2
 mdadm --zero-superblock /dev/sda3
 mdadm --zero-superblock /dev/sda5
 mdadm --zero-superblock /dev/sda6
 mdadm --zero-superblock /dev/sda7

If there was nothing to zero, you'll get this response:

 mdadm: Unrecognised md component device - /dev/sda1

All good!

6. Add the new disks partitions to the metadevices

 mdadm --add /dev/md0 /dev/sda3
 mdadm --add /dev/md1 /dev/sda1
 mdadm --add /dev/md2 /dev/sda6
 mdadm --add /dev/md3 /dev/sda7
 mdadm --add /dev/md4 /dev/sda2
 mdadm --add /dev/md5 /dev/sda5

When it's finished synchronising, /proc/mdstat should look something like:

 cat /proc/mdstat
 Personalities : [raid1]
 md1 : active raid1 sda1[0] sdb1[1]
       104320 blocks [2/2] [UU]
 
 md4 : active raid1 sda2[0] sdb2[1]
       6289344 blocks [2/2] [UU]
 
 md5 : active raid1 sda5[0] sdb5[1]
       4192832 blocks [2/2] [UU]
 
 md2 : active raid1 sda6[0] sdb6[1]
       2096384 blocks [2/2] [UU]
 
 md3 : active raid1 sda7[0] sdb7[1]
       16570944 blocks [2/2] [UU]
 
 md0 : active raid1 sda3[0] sdb3[1]
       6289344 blocks [2/2] [UU]
 
 unused devices: <none>

7. Now install grub on the master boot record (MBR) of the new disk

 grub
 Probing devices to guess BIOS drives. This may take a long time.
 
 
     GNU GRUB  version 0.97  (640K lower / 3072K upper memory)
 
  [ Minimal BASH-like line editing is supported.  For the first word, TAB
    lists possible command completions.  Anywhere else TAB lists the possible
    completions of a device/filename.]
 grub> root (hd0,0)
 root (hd0,0)
  Filesystem type is ext2fs, partition type 0x83
 grub> setup (hd0)
 setup (hd0)
  Checking if "/boot/grub/stage1" exists... no
  Checking if "/grub/stage1" exists... yes
  Checking if "/grub/stage2" exists... yes
  Checking if "/grub/e2fs_stage1_5" exists... yes
  Running "embed /grub/e2fs_stage1_5 (hd0)"...  15 sectors are embedded.
 succeeded
  Running "install /grub/stage1 (hd0) (hd0)1+15 p (hd0,0)/grub/stage2 /grub/grub.conf"... succeeded
 Done.
 grub> quit


Now you should be mirrored and good to go :-)